新闻资讯
More>>
推荐资讯
-
抛丸机的研磨方法有几种
一、 回转研磨法：回转研磨法是在研磨槽内装好工件，研磨石，研磨剂，水给于所定的..
-
杭州伟国型钢有限公司 抛丸机配件
优质的抛丸机配件是整台机械的核心，能保证设备长期以最低成本运行。。 叶片：抛丸..
-
抛丸机传动系统怎样发挥作用的
作用..
More>>
推荐产品
行业资讯
COMPANY NEWS
- 通过式抛丸机适用哪些抛丸工件?
- 本站编辑:杭州伟国型钢有限公司发布日期：2018-05-31 14:46 浏览次数：
通过式抛丸机主要适用于中大型工件，如电器柜配件、汽配件的铸造件、机械加工类等。其性能主要体现在以下几个方面：
1、清理室外型尺寸(长×宽×高)：1800×1800×3320m。设备门高：2500mm，这确保了中大型工件能在室体内有足够的运行空间。
2、吊钩载重达1000kgs, 起吊速度达20m/min，吊钩运行为速度：15m/min，自转速度：2.8r/min ，提高工作量和工作效率。
3、 抛丸器采用Q034型，单台抛丸比能可达到250kg/min，抛丸速度达76m/s.能够高效抛打工件，达到除锈清理效果。
4、除尘器采用BT-48袋式除尘器，处理风量在5600 m3/h，所以粉尘排放浓度控制在≤100mg/m3。
最终该通过式抛丸机抛丸清理后的工件表面质量为Sa2.5级，GB8923-88，局部为Sa2.0级。
The through shot blasting machine is mainly suitable for large and medium-sized workpieces, such as electrical cabinet fittings, casting parts of steam fittings, machining and so on. Its performance is mainly reflected in the following aspects:
1, clean up the outdoor size (long * width * height):1800 * 1800 x 3320m. Equipment door height: 2500mm, which ensures that large and medium-sized workpieces can have enough operating space in the chamber.
2, the hook load up to 1000kgs, lifting speed up to 20m/min, hook operation for speed: 15m/min, rotation speed: 2.8r/min, to maximize the workload and work efficiency.
3, the shot blasting machine adopts Q034 type, the single shot blasting ratio can reach 250kg/min, the shot blasting speed is 76m/s., can effectively throw the workpiece, achieve the derusting cleaning effect.
4, the dust collector uses BT-48 bag filter to deal with the air volume of 5600 m3/h, so the dust emission concentration is controlled at less than 100mg/m3.
Finally, the surface quality of the workpiece after shot blasting is Sa2.5, GB8923-88 and Sa2.0.
- 上一篇:什么是辊道通过式抛丸机？
- 下一篇:抛丸机袋式除尘布袋的更换
